The infrared thermal imaging camera converts the invisible infrared energy emitted by the object into a visible thermal image. The different colors on the thermal image represent the different temperatures of the measured object. When the thermal temperature camera fails, the device cannot operate normally. Then the following is the analysis of common failure causes of infrared thermal imaging cameras.
1. Infrared thermal imaging camera works and stops from time to time, and the measurement process is unstable
This may be caused by improper connection or poor contact with the infrared temperature camera. With the increase of time and frequency of use, foreign matter such as dust may be deposited at the line connection, and the metal may also undergo oxidation reaction when exposed to the air for a long time. These will form obstacles to the line connection and cause short-circuit conditions.
If this happens to the infrared thermal imaging camera, you must not take it lightly, because if it is handled improperly, it will not only seriously affect the performance of the device, but may even cause irreversible damage, causing loss and inconvenience to the user.
2. The monitor screen is jittery, and the image cannot be stabilized
This situation is mostly caused by the interference of the transmission signal of the infrared camera or the damage of the transmission cable signal. With the rapid development of information technology, the unit density is almost full of signals of different transmission frequency bands within the space of people's lives, which will inevitably cause interference with each other, which affects the stability and safety of the equipment. As the transmission cable is a very important key link in the entire system, the transmission reliability of different media and equipment is also different. If the site environment is bad, it will be affected to different degrees.
It is recommended to adopt corresponding measures to eliminate the interference of surrounding signals as much as possible during the operation of the thermal imaging camera, and at the same time choose the configuration you want to adapt according to the actual situation to avoid affecting the image quality.
3. The image quality is not clear or misplaced
The overall operation of the infrared camera involves the interaction of multiple links such as the host, monitor, and transmission equipment. If this happens, you need to investigate each link one by one to find the key to the problem. For example, check whether the parameter settings of the instrument are correct and standardized, whether the host is operating normally, whether the monitor has line connection problems, whether the transmission equipment is intact, etc.
Infrared temperature sensor cameras are high-tech products, which are often expensive. You must be careful and cautious during use to avoid economic losses. Don't panic if you encounter a failure, you can make preliminary measures based on common troubleshooting methods, and seek help from professional and technical personnel if necessary.
After we have determined the fault of the thermal imaging camera, we need to conduct professional repairs. In this repair process, we also need to pay attention to many matters. If you want to know more information and solutions in this area, welcome to contact us, we will provide you with professional solutions and related customized services.
As a professional thermal imager manufacturer, we have complete production equipment and technical processes and are committed to manufacturing high-quality thermal imager products. Our experienced R&D team has been researching and developing new thermal technologies and solutions to provide humans with a safer and more effective living and working environment. If you want to buy our high-quality thermal imaging cameras, please contact us in time!