We use cookies to enhance your browsing experience, analyze and measure engagement with our content. By clicking “Accept”, you consent to the use of cookies.
Q1: Can I charge Hunt via type-c cable?
Surely, it could perfectly work with type-c cable.
Q2: How much is the in-built memory of Hunt series?
Hunt series boat of great capacity reaching to 64GB.
Q3: How about the stability of images?
It avails the benefits of AI deep learning which could maintain the ideal image quality nearly 1 hour without calibration.
Q4: Does the Hunt support remote control?
Here are 2 methods to control Hunt remotely, the APP or Ring Bluetooth Remote Control.
Q5: Can I take Hunt as a monocular?
No, you can't, it doesn't support being taken as a monocular yet.
Q6: Hunt was stuck at the Thermeye when I upgraded the device, what should I do?
You could turn off the device first and enable the fallback procedure by pressing the up and down button at the same time, after the rebooting, upgrade the device via PC this turn.
Q7: Could I take apart and replace the batteries?
No, it doesn't support any illegal disassembling or it will void the warranty.
Q8: How many zero profiles of Hunt?
Hunt has 4 zero profiles, it could suit with different scopes.
Q9: Does Hunt equip with digital zoom?
No, Hunt is an attachment, it doesn't equip with digital zoom.
Q10: Do I need to re-zero the Hunt every time I take it apart?
No, you don't need to but if you install it with other day scope, it needs re-zero for sure.
Q11: Does the Hunt include the adapter for day scope? If it doesn't, what adapter do you recommend?
The Hunt doesn't include the adapter, the standard size of adapter connecting thread is M52*0.75, you could buy the suitable one referring to the given size.
Q12: Could I download the images and videos to my phone?
You could connect the Hunt with APP and download the images and videos to your mobile client.
Q13: How can I calibrate the image?
Double press the power button to finish the image calibration and there are 2 options manual and auto mode of image calibration.
Q14. What is the imaging principle of thermal camera?
All objects in nature with a temperature above absolute zero (-273 °C) can radiate electromagnetic waves. Thermal imaging mainly collects infrared light in the thermal infrared band (8μm-14μm) to detect the thermal radiation emitted by the object. After the thermal radiation is detected, it is converted into the gray value, and the gray value difference of each object is used to find and identify the target.
Q15. Can the thermal imager see through glass?
No, there is no thermal imager that can see through the glass because the glass can’t let infrared radiation within 8-14μm pass.
Q16. Will the bright sunlight damage the thermal imager?
It’s not recommended to point the thermal imager to powerful sources of energy, as it may cause permanent damage to the detector.
Q17. Why low temperature image is worse than positive temperature?
This is a characteristic of thermal imaging devices. At the temperature above 0℃, the temperature rise varies with the observed objects (environment and background) due to different heat conductivity coefficients. As a result, high-temperature contrast occurs and the image quality is better. When it is at a low temperature, the observed targets (background) usually cool down to a similar temperature because of reduced temperature contrast. Therefore, the image quality (details in particular) is worse.
Q18. Why the image freezes time to time?
In the course of the calibration process the image freezes on the screen – this is normal and not a defect.<br>Default calibration mode is “Automatic” (the software decides when calibration is necessary) but you can change it to “Manual” mode in the "Main menu" => "Correction" to calibrate when you need to based on actual image quality.<br>We recommend using automatic mode all the time.
Q19. How to enable the laser function in Cyclops 3 Series?
The laser function is disabled by default. Press and hold the middle button of the joystick and click the capture button for 5 times to activate the laser function. After activation, double click the power button to turn on and off the laser.
Q20. Why the GPS can not get the coordinate information?
1. The GPS function is not enabled on the device, press the middle button twice of joystick to enter the menu system - GPS option to enable the function;<br>2. Indoors or iron sheds and other environments will interfere with the reception of GPS signals, resulting in the inability to obtain GPS coordinate information, so please try to open the GPS coordinate search function in the wild or wide open areas;<br>3. The GPS function is disabled by default when our device is shipped. If this function is not used for a long time, after it is turned on in the wild, it will take about 20 minutes for the device to obtain GPS coordinate information.